
Compare the connector in the picture with the connector on your cable in order to find the correct holder. The holder is attached onto a tilt swivel, so it can be adjusted in order to avoid light reflection on the screen. Attach onto a ProClip Mounting Platform.
You install the product like this...

Please read all instructions and look at the pictures before attaching the holder.
1. Installation of cable: Place the holder with the backside downwards. Place the connector into the lower part of the holder. The marks pointing upwards, so you can see them when placing the connector into the holder. Place the enclosed front piece over the connector. Press the lower part of the holder and the front piece together so the cable is locked into place. Flip the holder over so the backside is upwards.
2. Screw the front piece into place with the enclosed screws. The cable is in place.
3. Installation of holder: Loosen the screw in the center of the holder so you can remove the tilt swivel attaching plate on the back. Place the attaching plate on desired position. Screw the attaching plate into place with the enclosed screws. Place the holder over the attaching plate so the tilt swivel fits. Screw the holder onto the attaching plate.
4. The holder is in place.